Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Fort Worth
A standard chimney inspection in Fort Worth typically runs between $149 and $329, depending on whether you need a Level 1 visual check or a Level 2 camera inspection. Most inspections take under two hours from arrival to report. If you’re in Fort Worth and want to know what’s actually happening inside that chimney before you light the first fire of the season, call us at (682) 382-9934. We’ll give you a written price before any work begins, every time.
Kindling Chimney Fort Worth knows the chimneys in this city because we work on them year-round. Our Chimney Inspection team serves everything from 1920s bungalows in Fairmount to 2000s builds out in Alliance and beyond. Fort Worth’s storm seasons, clay soils, and hard freezes create a very specific set of chimney problems, and we built our inspection process around catching them early.
Key takeaways:
- Level 1 inspections in Fort Worth run $149 – $199; Level 2 camera inspections run $249 – $329.
- Hailstorms and freeze-thaw cycles are the two biggest reasons Fort Worth chimneys fail.
- We document every finding with photos. You see what we see before you decide anything.
- Written price before work starts. Shoe covers and drop cloths on every visit. 365-Day Done Right Promise on every job.
Why Kindling Chimney Fort Worth Is Fort Worth’s Preferred Chimney Inspection Company
We’re not the only chimney company in Fort Worth, but we’re the one homeowners call when they want a straight answer about what their chimney actually needs. Danny Cortes leads our crew here, and he’s set a simple standard: every inspection gets documented with camera photos, every recommendation gets shown to the homeowner, and nothing gets recommended unless the evidence is there to support it. That’s the whole job.
Fort Worth homeowners tell us the same thing over and over. They’ve had another company come out, quote thousands of dollars in liner or masonry work, and leave them with no way to verify any of it. We do the opposite. You’ll see the cracked flue tile on camera. You’ll see the spalled brick in the photo. And if your chimney is fine, we’ll tell you it’s fine and send you on your way.
We’re part of the Cedarwell family of companies, established in 2003. Every technician is background-checked and arrives in uniform. We work under the Cedarwell Care Promise: shoe covers and drop cloths go down on arrival, nothing gets moved without asking, and a photo of the clean-up is taken before we leave. A live person answers our phone 24/7, so when you call (682) 382-9934, you talk to a person, not a voicemail tree.
Styles & brands we work with
Level 2 Chimney Inspection in Fort Worth
A Level 2 Chimney Inspection in Fort Worth is the inspection you need after a hailstorm, a hard freeze, a chimney fire, a major earthquake (rare here, but we do the work anyway), or any change to your fireplace system. It includes everything in a Level 1 visual check, plus a camera scan of the interior flue and access to the attic, crawlspace, and any accessible chase. In Fort Worth, we recommend this after any severe weather event that involved hail or wind-driven rain, and it’s required by most real estate transactions.
Most Level 2 inspections in Fort Worth run $249 to $329 flat. That’s the written price, before we start. If you’re buying or selling a home in Fort Worth, this is the inspection your lender or agent will typically ask for.
Camera inspection and photo report
We run a video camera up the full length of the flue and record everything. You get a written report with still images of anything we find. In Fort Worth’s older homes, that camera is often the first thing to catch hairline cracks in clay tile liners that have been spalling from freeze-thaw cycles for decades.
When storm damage changes the scope
After Fort Worth’s spring storm season, a Level 2 often turns into a leak-tracing job. Hail dislodges caps and cracks crowns, and wind-driven rain gets behind the flashing. The camera shows us exactly where water has been traveling, so the repair quote is surgical, not a guess.
Chimney Leak in Fort Worth
A Chimney Leak in Fort Worth almost always traces back to one of three things: a cracked crown, a displaced cap, or failed flashing where the chimney meets the roofline. Wind-driven rain from spring thunderstorms seeps through any gap it can find, then travels down the masonry and shows up as a ceiling stain near the fireplace. Sometimes that stain shows up feet away from the firebox, which throws homeowners off.
If you’re seeing water stains, efflorescence (white chalky residue on the brick face), or a damp smell near the fireplace, the inspection starts at the top of the chimney and works down. Leak diagnosis is included in our Level 2 inspection, so you’re not paying a separate diagnostic fee on top of a repair quote.
Flashing and crown failures
Steel flashing rusts through, and mortar crowns crack under Fort Worth’s freeze-thaw cycles. When the crown cracks, water runs straight down into the flue. We find this constantly in older neighborhoods like Ryan Place and Berkeley Place, where the original crowns have been exposed to decades of Texas weather.
Open chase tops and displaced caps
On newer pre-fab chimneys in places like Saginaw or north Fort Worth’s suburban builds, hail knocks caps loose or tears the chase top. Once that top is open, rain gets in and raccoons move in behind it. A camera inspection catches both.
Trusted Brands We Service in Fort Worth
When a Fort Worth chimney needs more than a sweep, we use professional-grade products that hold up to Texas weather. We work with Olympia Chimney caps and chase tops, DuraFlex liners, and Copperfield components. We stock common cap and liner parts locally for faster turnaround on Fort Worth jobs, so you’re not waiting on a backorder from two states away. The brands we use are built for heat, hail, and the kind of moisture cycles Fort Worth throws at a chimney all year long.
Common Chimney Inspection Problems We See in Fort Worth Homes
- Shattered clay flue tiles from hard freezes. Fort Worth’s older brick bungalows, especially in Fairmount and Ryan Place, often have original clay tile liners. A single hard freeze after water has worked into the mortar joints can shatter a tile. The fragments block the flue and create a hidden fire hazard.
- Hail-damaged caps and crowns on newer homes. Severe thunderstorms with hail are a regular fact of life in Fort Worth. On 1990s-era suburban homes with factory-built chimneys, we routinely find displaced caps and cracked crowns after storm season, leaving the flue open to water and nesting animals.
- Cracked mortar joints from expansive clay soil movement. Fort Worth sits on expansive clay. As the soil swells and contracts through wet and dry seasons, it moves foundations and chimney bases. That movement opens vertical cracks in the brick and mortar, letting water in and spalling the masonry from the inside.
- Wind-driven rain entry through a cracked crown, showing up as a ceiling stain. The water doesn’t always stay in the chimney. On a 1990s suburban home near Eagle Mountain Lake, a cracked crown let wind-driven rain run down inside the chase and emerge as a dark stain on the living room ceiling, six feet from the fireplace. A Level 2 inspection traced it back to the crown, not the flashing or the roof.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Fort Worth, TX
A Level 1 inspection in Fort Worth runs $149 to $199. That covers a visual check of the accessible portions of the chimney, the firebox, and the damper, plus a basic safety review. A Level 2 inspection runs $249 to $329 and includes the camera scan, attic and crawlspace access, and a written photo report. If your real estate transaction or insurance claim requires a Level 3 inspection, where we open part of the chimney to inspect concealed areas, that starts around $450 and is quoted only after Level 2 documentation shows it’s necessary.
Factors that affect cost in Fort Worth include the height and pitch of the roof, the age of the home, and whether the chase has access panels or needs to be opened. Estimates are always free, always written, and always delivered before the inspection begins. Call (682) 382-9934 for an exact quote.
We Also Serve Cities Near Fort Worth
Beyond Fort Worth, we handle chimney inspections in Haltom City, Kennedale, Bedford, and Arlington, plus most surrounding Tarrant County communities. If you’re just outside the city limits, call us and we’ll tell you straight whether we can get a crew to you this week. Fort Worth is our home base, but our service area covers the whole metro tightly.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Fort Worth
After any storm that produces hail larger than pea-sized, inspect the chimney once. Hail in Fort Worth regularly cracks crowns and dislodges caps, even on newer factory-built chimneys. If your roof is being inspected or repaired after a storm, have the chimney inspected in the same visit. That avoids a second trip charge and catches cap damage before the next rain gets in. Call (682) 382-9934 and we’ll schedule it alongside your roofing contractor’s work if possible.
A Level 2 inspection is necessary after any storm event involving hail or heavy wind, after a chimney fire, before a flue liner replacement, or when you’re buying or selling a home. Fort Worth’s combination of hail season, freeze-thaw cycles, and expansive clay soil movement means any of those events can create hidden damage that a basic visual check misses. The camera scan is the difference.
The short answer is housing stock and retrofitting patterns. Fort Worth has a much larger stock of original clay tile flue liners in its 1920s – 1940s brick bungalows. Dallas saw more widespread metal liner retrofits in the 1990s and 2000s. In Fort Worth neighborhoods like Ryan Place and Mistletoe Heights, water works into old mortar joints, a hard freeze expands it, and the clay tile cracks from the pressure. Dallas homes with stainless liners don’t experience that same failure mode as often. If you own a pre-1960 Fort Worth home, this is the single most common finding on a Level 2 camera scan.
Yes. Water entering through a cracked crown or failed flashing can travel several feet along a joist or down an interior wall before it pools and soaks through the ceiling drywall. A stain near a bedroom wall, a hallway, or a corner of the living room can still originate at the chimney. A Level 2 inspection with a camera trace is how we find the actual entry point, not just the exit stain.
Check the cap is seated and not dented, look for cracks in the crown from the ground (or have us come out), make sure the damper opens and closes freely, and look for any water stains on the ceiling around the fireplace. If you’re in an older Fort Worth home, don’t assume the flue is intact just because it worked last year. A call to (682) 382-9934 gets a written quote for a Level 1 or Level 2 inspection, and we’ll tell you honestly whether the chimney is safe to burn before the season kicks in.
Ready to Get Your Chimney Inspected in Fort Worth?
Storm season, freeze-thaw cycles, and old Fort Worth brick don’t wait for a convenient time. If you haven’t had the chimney looked at this year, call Kindling Chimney Fort Worth at (682) 382-9934. A real person answers 24/7. You’ll get a written price before any work begins, and if the inspection finds something, you’ll see exactly what we see before you decide what happens next.
Written by Danny Cortes, owner at Kindling Chimney Fort Worth, serving the Fort Worth area.