Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Arlington, TX | Kindling Chimney Fort Worth
We provide independent DuraFlex chimney cleaning and liner service across Arlington, from the brick ranches of Dalworthington Gardens to the two-story suburban tracts east of Cooper Street. What makes our DuraFlex work here different is that we treat Arlington’s shifting clay soil and hard water as part of the diagnosis, because they are. If your DuraFlex liner is showing glaze, pitting, or cap rust, call us at (682) 382-9934 and we’ll tell you exactly what’s happening inside the flue before any work begins. Our DuraFlex sales & service team stocks genuine components for fast turnaround across the Arlington area.
Why Arlington Residents Choose Us for DuraFlex Service
DuraFlex liners are built well, but the way they age in Arlington is specific. Our technicians have pulled a lot of DuraFlex pipe out of chimneys here and seen the same failure points repeat: the seam overlaps, the storm collar, the cap base. Danny Cortes leads the crew at Kindling Chimney Fort Worth, and after nearly two decades of Chimney Sweep in Arlington and Fort Worth he can usually tell you what’s happening with a liner before the camera even goes in. That kind of familiarity means we don’t upsell, and we don’t guess. We look, we measure, we show you the photos, and we write you a price before any tool leaves the truck.
As an independent DuraFlex service provider, we’re not tied to install quotas or authorized-partner incentives. That matters when someone tells you a liner needs replacing. We’ll show you the camera footage and the thickness readings and tell you honestly whether a clean and a new storm collar will do the job. Every visit includes the Cedarwell Care Promise: shoe covers and drop cloths down on arrival, pet-safe products where there is a choice, and a photo of the clean-up before the crew leaves. The 365-Day Done Right Promise backs the work itself.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Arlington
- Pitting at the seam overlaps on DuraFlex 316L liners: Arlington’s hard water minerals mix with creosote acids during hot, humid summers when the fireplace sits idle for months. That acidic slurry settles into the seam overlaps and starts eating at the stainless. We clean the seams carefully with hand tools and inspect each one under light for early pitting.
- Creosote glaze hardening inside DuraFlex Pro liners: Arlington’s winters are mild enough that a lot of families fire the fireplace only on the coldest nights, which means creosote sits and hardens into a black shiny glaze between burns. Standard wire brushes skate right over it. We use mechanical rotor cleaning or chemical treatment depending on how thick the glaze has gotten, then camera-verify the liner wall is clean.
- Kinked or collapsed DuraFlex AL liners from improper routing: In older Sherwood Forest homes with masonry offsets from the 1970s, we regularly find aluminum liners that were forced around tight bends during installation and have since kinked or bellied. An AL liner that’s collapsed partially is a venting hazard, and we’ll show you on camera before recommending whether a section replacement or re-route is the fix.
- Rain cap rust-through on DuraFlex caps exposed to hail: Arlington gets real hail, and galvanized original caps on 1970s-era homes never get upgraded. When a DuraFlex cap’s stainless collar rusts through at the base, water runs between the liner and the original flue tile and rusts everything it touches. We replace the cap and storm collar as a unit.
- Abrasion spots where the liner rubs cracked clay tile: Arlington sits on shifting clay soil, and in Dalworthington Gardens that movement transfers up through the chase and into the flue. We find DuraFlex liners with premature wear where cracked clay tile has shifted against the liner wall. Every sweep here includes a check for those abrasion points, because if we catch them before they thin past tolerance, we save you a full reline.
DuraFlex Service in Arlington: What Local Conditions Mean for Your Equipment
Arlington sits on a fault line with clay soil that moves. In neighborhoods like Dalworthington Gardens, where mid-century brick ranches sit on that shifting ground, flue tiles crack and migrate by fractions of an inch over decades. When someone has a DuraFlex liner in one of those chimneys, that movement causes the liner to rub against the cracked clay as the house settles differently summer to winter. We check every DuraFlex liner in this part of Arlington for abrasion spots along the outer wall, because that’s where the metal thins quietly until one day a gap opens and the liner fails. It’s not dramatic. It’s slow. And it’s very, very common here. If you’re in Dalworthington Gardens or anywhere in central Arlington with a 1960s brick ranch and a DuraFlex liner, ask us to look at the contact points on your next sweep. It could be the difference between a $50 patch and a $3,000 reline.
DuraFlex Models & Products We Service in Arlington
We work on the full DuraFlex product range in Arlington: the 316L stainless steel liner for wood-burning fireplaces and stoves, the DuraFlex Pro multi-fuel liner, the DuraFlex AL aluminum liner for gas appliance venting, and the DuraFlex rain cap and top kit line. When a liner section or cap has to be replaced, we use genuine DuraFlex components to keep the UL listing intact and the fit tolerances correct. For non-structural hardware like top plates or mortar collars, we’ll use heavy-gauge aftermarket parts where they genuinely outlast the original. We stock the common DuraFlex sizes and caps locally for fast turnaround, which means a hailstorm-damaged cap in Arlington doesn’t sit unrepaired for three weeks while parts ship in.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Arlington
Most standard DuraFlex chimney sweeps in Arlington run between $210 and $380 depending on the liner condition, the amount of glazed creosote present, and whether the fireplace shows any signs of moisture entry at the cap. A Level 2 inspection, which we recommend after any significant hail event, runs $150 to $300 and includes camera footage you’ll actually see yourself. Cap replacement on a DuraFlex liner typically lands between $180 and $450 depending on the top kit configuration. What you’ll never get is a surprise number at the door. We write the price down before any work starts, and if the camera shows nothing wrong, we tell you that plainly. Call (682) 382-9934 and we’ll set up a time to look.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Arlington
Arlington’s hard water means the minerals in rain and hose water don’t just evaporate off your chimney cap, they leave a crusty mineral film behind. When that film builds up on the cap base and storm collar over several years, it traps moisture against the stainless and accelerates corrosion at the exact spot where the liner meets the cap. That’s why we check the cap base and collar on every DuraFlex sweep in Arlington, not just the liner wall. If you hear water dripping near the damper after rain, call (682) 382-9934 and we’ll take a look before it rusts through.
Yes. A good hailstorm can damage the cap, shift the storm collar, or dent the exposed portion of the liner above the chase, and none of that is visible from the ground. A Chimney Inspection - Arlington with a Level 2 camera after a significant hail event tells you whether the liner was hit, whether the cap needs replacing, and whether any water has already entered. For DuraFlex liners specifically, we’re checking that the cap base is still sealed and the liner hasn’t been dented inward, which can create a creosote catch point that accelerates glaze buildup. If the last Arlington hailstorm was over your house, call us at (682) 382-9934.
No. The DuraFlex AL is an aluminum liner built for gas appliance venting only. Aluminum cannot handle wood-burning temperatures or acidic creosote, which is why we never install or recommend an AL liner for a wood fireplace, regardless of what the previous owner put in. If you have an AL liner connected to a wood-burning fireplace right now, shut it down and call (682) 382-9934. That’s a venting hazard we’ll correct the right way with a 316L or Pro stainless liner sized for the appliance.
That black shiny glaze is hardened creosote, and it forms when fires burn too cool and the chimney sits unused for months, which is exactly what Arlington’s mild winters and humid summers make happen. Stage three creosote glaze doesn’t come off with a standard wire brush, and forcing it actually polishes the stuff until it looks like glass. We use mechanical rotor tools or a chemical treatment depending on the liner material and the glaze thickness, then camera-verify the wall is clean. If your DuraFlex liner has glaze that a basic sweep didn’t remove before, that’s a sign the last company used the wrong tool for the job. Call (682) 382-9934 and we’ll do it right.
That depends entirely on the condition of the storm collar and the top plate. If the cap itself rusted through but the collar and plate are still sealing, a cap-only replacement is fine and we’ll tell you that. But if the collar has deteriorated, which is common in Arlington after years of hard water minerals and hail, replacing only the cap leaves a gap for water to enter, and you’ll be back in the same spot next spring. We’ll show you close-up photos of the collar and plate, give you a written price for the minimum fix, and install what’s actually needed. Call (682) 382-9934 before the next rain cycle.
Service Areas Near Arlington
Beyond Arlington, we run DuraFlex cleaning and liner service into Fort Worth, Burleson, Bedford, Euless, and Forest Hill. If you’re in the I-20 corridor or up toward the mid-cities, we’re already working in your neighborhood every week. For DuraFlex work south of town, we also provide DuraFlex service in Burleson, and for the west side of the metro, our DuraFlex service in Fort Worth team handles everything from Ryan Place to Benbrook. You can also see our full Arlington service area coverage for chimney sweeping, inspection, and repair.
Book Your DuraFlex Service in Arlington Today
If you’ve got a DuraFlex liner in Arlington, or you’re not sure what’s inside your flue, we’ll come out, look, and tell you the truth. Written price before any work starts. Shoe covers on. Photos when we leave. Call (682) 382-9934 and we’ll get you on the schedule this week.
A clean flue is just a family being careful – let’s make sure yours is.
Written by Danny Cortes, Owner at Kindling Chimney Fort Worth, serving Arlington since 2003.