Famco Fireplace Repair Nationwide

Famco Fireplace Repair in Fort Worth: What to Know First

Famco fireplace repair in Fort Worth typically costs between $145 and $480 for most component replacements, with full firebox rebuilds running higher when refractory panels have cracked through. We’re an independent Famco service provider with over two decades of hands-on chimney work in Fort Worth, and we give every customer a written price before the first tool comes out of the truck. This page is for homeowners with a Famco gas or wood-burning fireplace that’s acting up: pilot lights that won’t stay lit, dampers that won’t budge, or that one cold spot in the firebox that leaks air every winter. Call (682) 382-9934 and a live person answers, 24 hours a day.

Call (682) 382-9934

How Famco Products Fail – and How We Fix Them

Famco has made fireplace and venting components in the U.S. for decades, and Fort Worth homes show the full range of their product history. Here’s what our techs find most often, including details you won’t easily dig up on your own:

• Famco pilot assemblies on gas logs lose their thermocouple connection. On older Famco gas log sets, the pilot tube and thermocouple sit close to the burner pan. After a few Fort Worth winters, the thermal expansion cycles loosen the compression fitting, and the pilot drops out mid-burn. Homeowners often call thinking the gas valve failed. It’s usually just a loose fitting, a corroded thermocouple, or both. We clean the pilot orifice, tighten or replace the line, and test under load for a full burn cycle.
• Famco cast iron dampers bind at the pivot pin on homes built in the 1980s and 1990s. This is a classic in older Fort Worth bungalows and ranch-style houses. Soot and moisture from our humid springs collect at the hinge, the pin grips, and the damper either jams open or won’t fully close. We free the pin without hammering on the cast iron (which cracks it), then lubricate with a high-heat graphite compound that won’t off-gas into the living room.
• Famco wood-burning fireboxes show hairline cracks in the back refractory panel. The back panel takes direct flame heat while the front stays cooler, and after enough burn seasons, the panel develops a vertical crack that widens in cold weather. A cracked panel is not automatically a firebox replacement. Sometimes we can do a proper refractory repair with professional materials from companies like HeatShield or Olympia Chimney. Sometimes the panel needs to come out. We show you the photos and tell you which path is actually safe.
• Famco gas log burners develop uneven flame patterns because of rust on the burner tube ports. Fort Worth’s water has a high mineral content, and when families run humidifiers in winter, that moisture drifts into a cold firebox and accelerates rust on the burner. You’ll see blue-yellow flames that are tall on one side and weak on the other. The right repair is a burner cleaning with a wire brush and a port reaming tool, not a new set. We only recommend replacement when the ports have rusted shut.
• Famco fireplace inserts lose their blower motor bearings, especially after long summers of disuse. Dust settles in the motor housing. When you light the first fire in October, the blower whines. That’s the bearing running dry. A new Famco or aftermarket blower motor of equal spec usually fixes it in one visit. We keep common blower motors stocked in the truck.

Key takeaways: Most Famco repair calls don’t need a new fireplace. Most need a specific part cleaned, adjusted, or replaced, and the difference shows up in one clear photo. We won’t sell you a repair or a replacement you don’t need.

Our Famco Fireplace Repair Process

1. 1
   Call (682) 382-9934. A live person answers, 24/7. No voicemail trees, no callbacks that come two days later. We ask about your Famco model, your symptoms, and when you need us.
2. 2
   We arrive with shoe covers and drop cloths. The floors in front of your fireplace get covered before anything else. Nothing in your living room gets moved without asking. That’s part of the Cedarwell Care Promise.
3. 3
   Diagnostic with photos. We inspect the firebox, damper, burner, and venting. We take photos of what we find, then walk you through each one. If a part is worn but still safe, we say so. If a part is dangerous, we say that too, and we show you the evidence.
4. 4
   Written price before any work starts. You’ll see the exact cost of the repair, the parts, and the labor in writing. No on-the-spot pressure, no “while we’re here” surprise pricing.
5. 5
   Parts decision together. For Famco work, we use OEM parts where they matter for fit and warranty (thermocouples, pilot assemblies, damper hardware). For some older models where Famco parts are no longer produced, we use trusted aftermarket brands like DuraFlex, HeatShield, or Gelco. We tell you which is which and why.
6. 6
   Test, clean, photograph, and stand behind it. We run the fireplace through a full burn cycle, confirm carbon monoxide readings are safe, clean up fully, and take a photo of the finished work area before we leave. Every repair is covered by the 365-Day Done Right Promise.

What Famco Fireplace Repair Costs in Fort Worth

Here’s what we typically quote for Famco fireplace repair in Fort Worth. Every quote is still written and confirmed before work begins, and the numbers below reflect what we see in houses across the city:

The price moves based on the age of the unit, how hard parts are to access, and whether we’re matching an OEM Famco part or a quality aftermarket equivalent. If your Famco fireplace needs a liner or a major masonry repair, we’ll quote that separately and show you the camera footage that backs it up. Call (682) 382-9934 for a free estimate on your specific Famco model.

Why Fort Worth Homeowners Call Kindling Chimney Fort Worth for Famco Work

Danny Cortes grew up in Los Angeles and learned his first trade skills at Los Angeles Trade-Technical College before working the better part of two decades cleaning and inspecting chimneys across Fort Worth. He’s worked on Famco units in older bungalows in the Fairmount Historic District and on newer builds near the edge of the city, and he knows how each style of fireplace collects creosote differently depending on how the family uses it. His crew walks every homeowner through what they found inside the flue before a single tool touches the firebox.

No job comes with a surprise. The 365-Day Done Right Promise means if the work isn’t right, we make it right, on every Famco repair. The Cedarwell Care Promise means shoe covers and drop cloths on arrival, nothing moved without asking, a written price before work starts, and a photo of the clean-up before the crew leaves. Our techs are background-checked, uniformed, and trained on the C.A.R.E. values on every visit: Care for the home, Accountability for the work, Respect for the family living there, and Everything documented. The crews use pet-safe products where there’s a choice, and quiet tools when the kids are asleep. And because no two older chimneys fail the same way, we also carry repair materials from DuraFlex, HeatShield, and Gelco, so a Famco job never gets put on hold waiting for the right part.

FAQs