A Kindling company - serving Fort Worth, TX

Olympia Chimney Chimney Sweep Nationwide

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Olympia Chimney Chimney Sweep in Fort Worth: What to Know First

An Olympia Chimney chimney sweep in Fort Worth typically takes 60 to 90 minutes, costs between $189 and $329 for a standard open fireplace, and can be booked within a week during most of the year. We’re an independent Olympia Chimney service provider, not a factory-authorized shop, which means we tell you plainly what needs attention and what can wait without worrying about a quota. If you own a home in Fort Worth with an Olympia fireplace system and haven’t had the flue cleaned this season, this page tells you exactly what to expect. Call (682) 382-9934 and a live person picks up, 24/7.

Professional cleaning a residential chimney flue with a specialized brush nationwide

Call (682) 382-9934

This page is for Fort Worth homeowners who use their fireplace regularly, want specific information about their Olympia Chimney system, and prefer a crew that treats the house like a living space rather than a job site. We name prices up front, write them down before any work starts, and take a photo of the clean-up before we leave.

How Olympia Chimney Products Fail – and How We Fix Them

Olympia Chimney builds solid, long-running systems, especially their older galvanized and stainless steel air-cooled lines that went into thousands of Fort Worth homes built from the 1980s through the 2000s. But like every chimney brand, theirs has patterns. Here are the ones we see most often across Fort Worth, from Fairmount bungalows to newer builds in Benbrook and Saginaw.

  • Creosote packing at the firestop spacer. In older Olympia air-cooled pipe systems, the firestop assembly at the ceiling penetration has a tight annular space where flue gas cools quickly. That cooling promotes creosote condensing and packing into a hard, glossy crust right at the framing pass-through. We find it on nearly every neglected Olympia wood-burning installation older than five years. The fix is careful mechanical removal with hand rods before sweeping the full run, never aggressive wire whipping that can gall the inner stainless wall.
  • Warped baffle plates above the firebox on Olympia wood stoves. The baffle sits in the hottest part of the burn and eventually sags or cracks, especially on stoves that have seen overfiring. A warped baffle makes the draft erratic, which makes creosote deposit unevenly, which makes the next sweep harder. We check baffle condition on every Olympia wood stove sweep and tell you if replacement is needed before the accumulation gets worse.
  • Galvanized outer casing corrosion in uninsulated chase installations. Fort Worth’s humidity plus the freeze-thaw cycles in January and February accelerate rust on Olympia’s galvanized outer pipe when the chase isn’t insulated properly. You’ll see rust staining at the ceiling collar or a musty smell near the fireplace. We document it during the sweep and can coat or recommend replacement before it compromises the wall pass-through.
  • Crushed or separated slip-joint connections. Olympia pipe sections lock together, but settlement in Fort Worth’s expansive clay soil shifts framing by fractions of an inch. Over a decade, that can unseat a slip joint, leaving a small gap where smoke leaks into the chase. We check every accessible joint during a sweep and flag gaps that need realignment, sealing, or a new connector band.
  • Aftermarket drop-in liners that don’t match Olympia’s diameter. We sometimes find chimneys where a previous contractor dropped in an ovalized or undersized liner to avoid a masonry rebuild. It creates turbulence, cools the flue gas, and leads to creosote buildup faster than the original system ever would. We’ll tell you honestly if the liner geometry is working against you and whether a properly sized liner from our shelf makes sense.
Explore

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Our Olympia Chimney Chimney Sweep Process

Every Olympia sweep in Fort Worth follows the same careful sequence, and Danny Cortes trains each technician to treat the home like it has kids and a dog napping in the next room.

  1. 1
    Call and written price. A live person answers. We ask about the fireplace type, the last sweep, and any smells or drafting problems. We give a written price before we book the truck.
  2. 2
    Arrival and floor protection. Shoe covers go on at the door. Drop cloths go down from the entry to the fireplace. We don’t move furniture without asking, and quiet tools come out if you tell us kids are asleep.
  3. 3
    Inspection of the Olympia system. We check the firebox, baffle, pipe joints, chase cover, and termination cap. On Olympia air-cooled systems, we pay particular attention to the firestop spacer and the slip-joint connections.
  4. 4
    Mechanical sweep from the firebox up. Hand rods and sized poly brushes matched to the Olympia pipe diameter. No chemical shortcuts, no wire whipping on stainless interiors. The creosote and soot fall into a HEPA-filtered vacuum running at the firebox opening, so nothing drifts into the room.
  5. 5
    Parts decision with you. If we find a baffle, joint, or cap problem, we show you the camera image and explain the OEM-vs-aftermarket trade-off in plain terms. You decide before any repair work proceeds. No pressure, no “today only” pricing.
  6. 6
    Clean-up photo and guarantee. We vacuum the hearth, wipe down the glass, and take a photo of the finished clean-up. It’s part of the Cedarwell Care Promise. Every sweep is backed by the 365-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Olympia Chimney Chimney Sweep Costs in Fort Worth

Most standard Olympia chimney sweeps in Fort Worth run between $189 and $329, depending on pipe height, creosote stage, and whether it’s a wood stove, insert, or open fireplace. Here’s the realistic range:

  • Standard open fireplace sweep: $189 – $249
  • Level 1 inspection add-on: $49 – $89, often included with a sweep
  • Level 2 inspection with interior camera: $199 – $299 for Olympia systems
  • Heavy glazed creosote removal: $329 – $449 (longer mechanical work, sometimes chemical pre-treatment)
  • Baffle replacement on Olympia wood stoves: $120 – $260 in most cases

The price goes up if we find a slipped joint, a rust-compromised pipe section, or glazed stage-three creosote that adds an hour of careful hand work. The price goes down if the chimney was swept within the last two years and it’s a simple top-down run. You get a written number before any work begins, every time, no exceptions. Call (682) 382-9934 for an exact quote.

Why Fort Worth Homeowners Call Kindling Chimney Fort Worth for Olympia Chimney Work

The difference isn’t the brush, it’s what happens before and after. Danny Cortes grew up in Los Angeles and picked up his first trade skills at Los Angeles Trade-Technical College before spending the better part of two decades cleaning and inspecting chimneys across Fort Worth. He’s worked Olympia systems in the Fairmount Historic District, in Ridglea Hills, and out in the newer neighborhoods west of Loop 820. He knows an Olympia air-cooled pipe from across the room and taught his crew the same recognition.

The 365-Day Done Right Promise covers every Olympia sweep and inspection. If it’s not done right, we make it right, no fine print. We keep professional-grade liners and components from DuraFlex, HeatShield, and Gelco on the truck, so if your Olympia system needs a replacement part, it’s done with material built to last, not patched with whatever the supply house had on discount. Written price before work starts. Clean-up photo before we leave. A live person answers 24/7 at (682) 382-9934.

FAQs

Need Chimney Cleaning help in Fort Worth? Licensed & insured · Written inspection reports response · free estimates
Call (682) 382-9934
Local Service Coverage

Request a Free Estimate in Fort Worth

Tell us what you need - Kindling Chimney Fort Worth responds fast. No obligation.

By reaching out through this form, you agree to our Privacy Policy and consent to being contacted by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch