Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Fort Worth?
Chimney liner and rebuild work in Fort Worth typically runs between $2,800 and $7,500 for a full stainless steel liner installation with a partial rebuild, while a complete chimney rebuild from the roofline up ranges from $8,000 to $15,000. Most Fort Worth homeowners we serve pay around $4,200 for a liner replacement paired with moderate masonry repair, including materials, labor, and a Level 2 inspection before and after the work. Your exact price depends on flue size, liner material, roof pitch, and how much of the existing masonry is salvageable.
At home, we believe every family should know the real numbers before a single brick gets touched. That’s why we deliver a written price before any work begins, no exceptions. Here’s the full breakdown of what you should expect to pay in Tarrant County in 2026.
Chimney Liner & Rebuild Cost Breakdown (2026)
Fort Worth’s market has shifted over the past few years. Older homes in Fairmount, Ryan Place, and Mistletoe Heights often need more masonry work than homeowners expect, while newer builds in Walsh, Alliance, and Chisholm Trail Ranch tend to need liner replacement sooner because of cheap original construction. Here’s what we’re seeing across the metro in 2026:
| Service | Typical Fort Worth Price Range | What’s Included |
|---|---|---|
| Stainless steel liner installation (single flue) | $2,800 – $4,500 | Liner, insulation, top plate, rain cap, connector to appliance, Level 2 inspection |
| Stainless steel liner installation (multi-flue) | $4,200 – $7,500 | Two liners, custom top plate, crown repair if needed, full inspection |
| Chimney crown rebuild (precast or poured) | $800 – $1,800 | Remove old crown, form and pour new crown with proper overhang and drip edge |
| Partial masonry rebuild (top 10-20 courses) | $1,500 – $4,000 | Brick or stone replacement, mortar matching, flashing replacement at roofline |
| Complete chimney rebuild (roofline up) | $8,000 – $15,000 | Full tear-down and rebuild, new liner, new crown, new flashing, inspection |
| Firebox rebuild (interior) | $1,200 – $3,500 | Firebrick replacement, mortar repair, smoke chamber parging if needed |
| HeatShield cerfractory liner restoration | $1,800 – $3,200 | For chimneys where original clay tiles are cracked but masonry is sound |
| Gas flue liner (aluminum, for gas fireplaces/furnaces) | $1,400 – $2,600 | Aluminum liner, connectors, venting verification, CO safety check |
These ranges reflect what we’ve quoted across Fort Worth in the last twelve months. A single-story ranch in Wedgwood with easy roof access and a standard 6-inch flue lands at the lower end. A three-story home in Berkeley Place with a steep pitch, a clay-tile flue that’s failing, and brick spalling from years of North Texas freeze-thaw cycles lands at the higher end, sometimes beyond.
What Drives the Price Up
Roof pitch and access. If your roofline is steep or the chimney sits near power lines, we need additional staging and safety equipment. That adds labor hours, and labor is the single biggest line item on any rebuild.
Masonry condition. Fort Worth’s clay-heavy soil expands and contracts with moisture. Homes built before 1980 often have brick chimneys that have absorbed decades of that movement. If the mortar joints are failing below the roofline, a “simple liner job” becomes a structural repair.
Flue size and shape. Rectangular or oversized flues rarely accept a standard round liner without custom fabrication. If your fireplace was built for 13×13 clay tiles and you’re relining for a modern insert, the liner needs to be ovalized, which costs more.
Historic district requirements. If you live in a designated historic area like Fairmount, the city may require matching brick, specific mortar colors, or even custom-tooled joints. That’s a real cost multiplier, and we’ve handled enough of these to quote it accurately the first time.
What Keeps the Price Down
Good existing crown. If the concrete crown is intact and only the liner failed, you’re looking at liner work alone, often in the $2,800 to $3,500 range.
Single-story access. Walkable roofs mean faster setup. Faster setup means fewer labor hours.
HeatShield eligibility. Not every chimney is a candidate, but when the clay tiles are cracked yet the masonry surrounding them is solid, a cerfractory resurfacing system like HeatShield can restore the flue for about half the cost of a full stainless liner and rebuild. We’ll tell you honestly if your chimney qualifies, because if it doesn’t, we won’t pretend it does.
What Affects Chimney Liner & Rebuild Pricing in Fort Worth
Every chimney is different, but here are the factors that move the final number the most in the Fort Worth market specifically:
- Age of the original chimney. Homes built during Fort Worth’s post-war boom (1945-1970) often used lime-based mortar that breaks down faster than modern Portland cement mixes. If your home in Ridglea Hills or Westcliff dates to that era, expect more repointing work as part of any rebuild.
- Freeze-thaw damage. North Texas winters may be mild compared to the Panhandle, but we still get enough freeze-thaw cycles each year to pop brick faces and crack crowns. Chimneys that face north or west take the brunt of winter storms and often need more masonry restoration than south-facing ones.
- Vented vs. unvented gas logs. If you’re switching from wood to gas or already have vented gas logs, the liner spec changes. Vented gas systems need a different liner material (usually aluminum or specific stainless grades) sized for the BTU output. That changes both material cost and installation time.
- Chimney height above the roofline. Building code requires the chimney to extend at least 3 feet above the roof penetration and 2 feet above anything within 10 feet. Taller chimneys need more brick, more liner, and more scaffolding time.
- Interior vs. exterior chimney. An exterior chimney on a gable end is easier to access but takes more weather abuse. An interior chimney that runs through the center of the house in places like Tanglewood or Overton Woods is harder to rebuild but stays drier over time. Access difficulty and exposure both show up in the quote.
- Appliance changes mid-project. If you’re also installing a new fireplace insert or upgrading a furnace that vents through the same flue, the liner sizing and connector work change. We quote both scenarios up front so there’s no surprise line item at the end.
One more thing specific to Fort Worth: older neighborhoods east of I-35W, including Stop Six and Polytechnic, have a higher concentration of chimneys built with non-standard brick sizes. Matching those bricks isn’t always possible from local suppliers, which means we source from salvage yards or custom-match the mortar to blend new brick with old. That’s the kind of thing that never shows up on a generic pricing website but absolutely affects your final number.
How to Save on Chimney Liner & Rebuild
Saving money on chimney work doesn’t mean cutting corners. It means scheduling smart, choosing the right repair method, and catching problems before they compound. Here’s what we tell every Fort Worth homeowner who asks us how to keep costs reasonable:
Get an annual inspection, not just a cleaning. A Level 2 inspection runs $200 to $400 and catches liner cracks, crown damage, and mortar deterioration before they become rebuilds. The chimney that gets inspected every year rarely needs a full rebuild. The chimney ignored for fifteen years almost always does. Danny Cortes, who leads our Fort Worth team, regularly sees homes where a $300 repair would have prevented a $12,000 rebuild a decade earlier.
Choose HeatShield when it qualifies. If your liner tiles are cracked but the chimney structure is sound, HeatShield cerfractory resurfacing is typically half the price of a stainless steel liner installation. We’re certified to install it, and we’ll tell you honestly whether your chimney is a good candidate. If it’s not, we’ll say so and explain why.
Schedule during the shoulder season. Fall is our busiest time in Fort Worth because everyone remembers their fireplace right before the first cold snap. Spring and early summer appointments often mean faster scheduling and occasionally better material pricing from suppliers, which we pass through.
Combine projects when it makes sense. If you’re already getting the roof replaced or the fireplace converted to gas, doing the liner work at the same time saves on setup costs, scaffolding, and inspection fees. We coordinate with roofing contractors regularly and can phase our work to match their schedule.
Ask for the written price before work begins. This is what we do on every job, and it protects you from the classic bait-and-switch where a “free estimate” becomes a bill for work that ballooned mid-project. Our price is written, specific, and honored. If something changes during the job, we stop and talk to you before the work continues. No surprises means no overspending.
The fastest way to find out your actual number is to call us at (682) 382-9934 and schedule a free estimate. We’ll come out, inspect the chimney, and hand you a written quote before we leave. If you decide not to move forward, that quote is yours to keep and compare.
FAQs – Chimney Liner & Rebuild Cost
Is it cheaper to repair or replace a chimney liner?
Repairing with a HeatShield resurfacing system typically costs $1,800 to $3,200 in Fort Worth, while a full stainless steel liner replacement runs $2,800 to $7,500. If the existing liner has minor cracking and the masonry is sound, repair is almost always cheaper. Call (682) 382-9934 and we’ll tell you which option your chimney actually qualifies for, with a written quote either way.
How much does a full chimney rebuild cost in Fort Worth?
A complete chimney rebuild from the roofline up runs $8,000 to $15,000 in Fort Worth depending on height, brick match requirements, and roof access. Partial rebuilds of the top 10 to 20 courses typically land between $1,500 and $4,000. Call (682) 382-9934 for an exact quote on your chimney, estimates are free and written.
Can you fix a chimney liner without a full rebuild?
Yes, and in Fort Worth homes with structurally sound chimneys, we do it often. HeatShield cerfractory resurfacing restores cracked clay tile liners for $1,800 to $3,200, which is roughly half the price of a stainless steel liner installation. We’ll only recommend it when your chimney qualifies, and a Level 2 inspection is included in the free estimate.
How long does a chimney liner and rebuild take?
A standard stainless steel liner installation takes one to two days from setup to final inspection. A partial masonry rebuild adds another one to two days. A complete chimney rebuild typically runs four to six working days including brick sourcing, tear-down, rebuild, and curing time. We protect your floors with drop cloths on arrival and show you a photo of the clean-up before the crew leaves, every time.
Do I need a permit for chimney work in Fort Worth?
Fort Worth requires permits for structural masonry work including chimney rebuilds, and liner installations must meet current fire code for the specific appliance served. We handle the permit paperwork and code compliance on every job, so you don’t have to navigate the city process yourself. Call (682) 382-9934 and we’ll explain exactly what your specific project needs.
Get Your Written Chimney Liner & Rebuild Quote
Every chimney we work on in Fort Worth gets a written price before we touch a single brick. No pressure, no last-minute add-ons, no ambiguity about what the crew will do or what the bill will be. Danny Cortes and our team of background-checked, uniformed technicians follow the C.A.R.E. values on every visit: shoe covers and drop cloths go down on arrival, nothing is moved without asking, and a photo of the clean-up is yours before we leave. All work is backed by the 365-Day Done Right Promise, which means if it isn’t done right, we make it right. Call (682) 382-9934 any time, any day. A live person answers, and your estimate is free.
Learn more about our Chimney Liner & Rebuild services in Fort Worth or start with a free inspection today.
Pricing reflects the Fort Worth market as of 2026. Kindling Chimney Fort Worth offers free estimates – call (682) 382-9934.
Written by Danny Cortes, Owner at Kindling Chimney Fort Worth, serving Fort Worth and Tarrant County. Danny leads a team of background-checked, uniformed technicians who are part of the Cedarwell family of companies, established in 2003, each location independently owned and operated.
What Our Customers Say
"First sweep since we bought the house. He put down a drop cloth and used a vacuum so there wasn't a speck of soot anywhere, which with light carpet I was dreading. Showed me the flue on camera."
- Lorraine Petty"Careful and clean from start to finish. He wore booties inside and taped off the hearth. Explained what was safe to burn and what wasn't, calm and no pressure."
- Marcus Halvorsen"Good careful work. The only hiccup was the inspection report took a few days to arrive by email, but I just had to ask once. The sweep itself was spotless."
- Simone Beckett