Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Burleson
Fireplace repair in Burleson usually falls between $180 and $760 depending on what’s actually wrong, and most jobs we handle are done in a single visit. That’s the honest range, and it’s one we give every homeowner in writing before any work starts. Burleson’s older brick ranch homes, particularly those built between the 1970s and 1990s, have chimneys that are decades into their service life, and that means clay tile liners, mortar joints, and dampers are reaching the point where attention isn’t optional. If you’re smelling smoke when the fireplace is off or noticing crumbling brick on the chimney face, call us at (682) 382-9934 and we’ll send a background-checked technician to take a real look, camera in hand.
Why Kindling Chimney Fort Worth Is Burleson’s Preferred Fireplace Repair Company
Burleson homeowners call us because our techs show up on time, put down shoe covers and drop cloths before anything else, and always hand over a written price before touching a single brick. That’s the Cedarwell Care Promise, and it’s standard on every Fireplace Repair visit, not a premium add-on. Danny Cortes leads our Fort Worth team, and he’s built a reputation around one thing: treating your home the way he’d want his own treated, with kids’ toys left untouched and floors left cleaner than we found them.
We’re part of the Cedarwell family of companies, established in 2003, and while every location is independently owned and operated, the standards don’t waver. Background-checked, uniformed technicians follow the C.A.R.E. values on every call: Care, Accountability, Respect, and Excellence. It’s not a slogan. It’s the checklist they work from. When Burleson families call us, they get a live person on the line 24 hours a day, 7 days a week, never a voicemail tree.
Response time to Burleson is typically same-week, sometimes sooner depending on our route through Johnson County that day. Dispatch is coordinated from our Dallas-Fort Worth office, but the crews know Burleson’s streets, from the subdivisions off Alsbury Boulevard to the older blocks near Old Town. When you describe a shared flue or a damp smokey firebox off Renfro Street, we already know what we’re walking into.
Styles & brands we work with
Wood Stove Installation in Burleson
Wood Stove Installation in Burleson is a different job than fireplace repair, and a lot of homes here are discovering why. With mild winters and occasional evening fires, a properly installed wood stove can heat a living room far more efficiently than an open masonry fireplace that’s really just sending heat up the chimney. Most installations in Burleson run between $2,800 and $5,400 depending on the stove model, whether we’re using a DuraFlex stainless liner, and the length of the flue run. For older ranches where the existing clay tile liner has cracked, the liner alone can run $1,200 to $2,600 installed.
Why Burleson Homes Need a Proper Flue Liner
In Burleson’s 1970s-1990s brick ranches, the original clay tile liners were built for open fireplaces, not sealed wood stoves. A wood stove pushes hotter, more concentrated exhaust into that flue, and if the liner is cracked or unlined, that heat reaches combustible framing. That’s a structural risk, not a performance issue. We install DuraFlex stainless liners sized to the stove and fully insulated where code requires it.
What the Installation Day Looks Like
Our crew lays drop cloths from your entry to the hearth, protects the nearby floor, and uses quiet tools where possible, so if you’ve got a napping toddler, we’re not rattling the whole house. We verify clearances, draft, and carbon monoxide readings before we leave. Every installation gets a written price before we start and falls under the 365-Day Done Right Promise: if it isn’t right, we make it right.
Gas Fireplace Repair in Burleson
Gas Fireplace Repair in Burleson is one of the most common calls we get from newer subdivisions around Hidden Creek and Mistletoe Hill. Homeowners fire up the gas logs in November after eight months of disuse and find the pilot won’t stay lit, the flame is weak and yellow, or the glass is fogged with soot. Most gas fireplace repairs here run $180 to $420 for pilot assembly replacement, thermocouple or thermopile work, and burner cleaning. A full gas valve replacement can push that to $500-$700.
Pilot Light Repair and Thermocouple Issues
When a gas fireplace pilot light won’t stay lit in Burleson, it’s almost always a failing thermocouple or a clogged pilot assembly. The thermocouple is a small sensor that shuts off gas if the pilot goes out, and after years of thermal cycling, it wears down. We stock common replacement parts for major brands, which keeps most repairs to a single visit.
Venting and Odor Problems
Gas fireplaces in Burleson’s tighter, newer homes sometimes vent poorly because a bird nest or wasp nest has partially blocked the termination cap. We inspect the entire vent run, not just the firebox. We also check for gas line leaks at every connection point, and we don’t leave until a gas sniffer confirms zero leaks at the appliance.
Trusted Brands We Service in Burleson
We work with the brands homeowners already trust and ones we’d put in our own homes. That includes Copperfield for chase covers and caps, HeatShield for flue resurfacing when a full liner replacement isn’t necessary, and Gelco for waterproofing that holds up to Burleson’s hot, humid summers. We keep common Copperfield chase covers and termination caps in stock for Burleson jobs, which shortens the wait on a lot of repairs. If the brand you have isn’t a match, we’ll tell you up front and suggest what is, with a written price before you commit.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Burleson Homes
- Cracked clay tile flue liners in 1970s-1990s brick ranches. Decades of thermal cycling, even from occasional fires, cause the tiles to crack and spall. Sharp fragments can block the smoke chamber and create a draft problem that shows up as smoke rolling into the living room.
- Hairline cracks in chimney crowns around Oak Valley. Mature trees mean shade, but they also mean slower evaporation after rain. Water seeps into tiny crown cracks, and when it freezes, those cracks widen. Over time, the brick face spalls and loose pieces can fall.
- Shared flues on Johnson Avenue and Renfro Street. A single flue serving both a fireplace and a furnace accumulates creosote unevenly. When the furnace kicks on, it can backdraft and push smoke into the living space. These need careful inspection, not a quick glance down the chimney.
- Damper failures that let conditioned air escape all summer. In Burleson’s hot, humid summers, a warped or rusted damper lets cooled air run right up the flue. Homeowners notice it as a sticky living room and a higher July electric bill.
Pricing for Fireplace Repair in Burleson, TX
The honest picture for Burleson: most standard fireplace repairs fall between $180 and $760. Gas pilot and thermocouple work lands at $180-$420. Firebox repointing and minor masonry runs $350-$650. A new top-sealing damper is typically $250-$400 installed. Flue relining with a DuraFlex stainless steel liner runs $1,200 to $2,600 for a typical single-story ranch. Full firebox rebuilds, where the firebrick has failed completely, can reach $1,800-$3,200. We give every Burleson homeowner a written price before work begins, and that price doesn’t change mid-job. Call (682) 382-9934 for a free estimate.
We Also Serve Cities Near Burleson
While this page is built for Burleson, our crews regularly run route through Kennedale, Arlington, Fort Worth, and Haltom City. If you’re just over the line and need fireplace repair, the same pricing, the same care promise, and the same direct phone line apply. Call (682) 382-9934 and we’ll get you scheduled.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Burleson
Homes along Johnson Avenue, especially the brick ranches built between the 1970s and 1990s, often have a shared flue serving both the fireplace and the furnace. That configuration accelerates creosote buildup and increases the chance of backdrafting when the furnace runs. It also means two appliances are aging the same flue at once, so clay tile liners crack sooner than they would in a dedicated-flue fireplace in a newer subdivision off Alsbury Boulevard. The fix is often a stainless steel liner and a thorough camera inspection to confirm the shared flue is still safe for both appliances. If your Johnson Avenue home has a shared flue and you haven’t had it inspected in years, call (682) 382-9934 and ask for a Level 2 camera inspection.
Yes, and it happens more often here than people expect. Burleson gets enough winter freeze-thaw cycles that a hairline crown crack becomes a water entry point. Water runs down the flue, soaks into the firebrick, and weakens the mortar joints. Over a few years, that shows up as crumbling mortar in the firebox, and eventually as spalled firebrick that needs replacement. The crown crack is a $350-$650 repair. The firebox rebuild it prevents runs $1,800 or more. Call (682) 382-9934 for a crown inspection before the next freeze cycle.
Actually, infrequent use is a common reason Burleson fireplaces develop problems. Low-temperature fires a few times a year burn incompletely, leaving behind creosote that doesn’t get hot enough to burn off. Add Burleson’s humid summers, and that creosote absorbs moisture and becomes a sticky, hardened layer. Meanwhile, birds nesting in mature trees around neighborhoods like Oak Valley and Mistletoe Hill find an unused chimney an inviting spot. An annual inspection catches both problems before they become repair bills. We recommend one inspection per year, and it includes a camera look at the full flue.
Third-degree creosote looks like a thick, shiny, tar-like glaze coating the inside of the flue. It’s hard, condensed, and concentrated creosote that forms when fires burn cool and the flue never gets hot enough to dry it out. It can be removed, and in Burleson we use professional rotary cleaning tools and, in stubborn cases, a product like Poultice Creosote Remover to break it down. The process takes longer than a standard sweep, which is why pricing runs higher, usually $250-$450 for a heavy third-degree removal. After removal, we camera-inspect the flue to confirm the creosote didn’t hide cracked tiles behind it.
Demand camera evidence. Any legitimate fireplace repair company should be able to show you exactly what the camera sees inside your flue, in real time, on a screen you can look at. If the clay tile liner is cracked, spalled, or completely missing, you’ll see it. If the liner is intact and the damper is the actual problem, you’ll see that too. We never recommend a liner replacement without showing the homeowner the footage first. That’s the standard Danny Cortes holds our Burleson crews to, and it’s exactly how we caught the failing clay liner and damper in that 1980s brick ranch off Renfro Street, where the fix was a DuraFlex liner and a new damper, not a rebuild. If a company tells you the liner is bad but won’t show you the footage, get a second opinion. Call (682) 382-9934 and we’ll bring the camera.
If your fireplace in Burleson is smoking, smelling, or just hasn’t worked right in a while, don’t guess. We’ll inspect it with a camera, show you what we find, and hand you a written price before any tool comes out. Call Kindling Chimney Fort Worth at (682) 382-9934 for a free estimate. Live person, every time, day or night.
Written by Danny Cortes, Owner at Kindling Chimney Fort Worth, serving Burleson and surrounding Johnson County communities.